The 2 wheel drive dyno is a high performance off road vehicle that is built for those who are interested in off road driving and extreme terrain pushing abilities. These vehicles were originally developed and built by rally car drivers who were seeking the fastest way to get their car up some sort of obstacle course. Since then these vehicles have been made available to the public and can be found for sale in many different sizes, styles, and price ranges. In this article I will show you how to build your own. I will also go over some important safety precautions that need to be taken when building your own.
Why you need Build a 2 Wheel Drive dyno
To build your own 2 wheel drive dyno you will want to gather some important parts like the following; axle backlinks, winch springs, a winch cable, a tune Evo 8 Revolver, a Throttle pump, and a gear shift knob for your gearbox. After you have gathered all of these parts you will be ready to install on your car. The very first thing you will need to do is mount the axle backlinks to the wheels from the front. Once you have done so you can install the winch spring and tighten it with a bolt.
After you have done that you will need to install your winch cable, the Throttle pump, the gear shift knob, and the tune Evo 8 Revolver. After you have done this you will need to bolt everything together and make sure that the winch cable is running out of the backlink. After you have done so you should replace the wheel drive cage and secure the cage with some aluminum pipe. After that you can put some black sheet metal on top of the pipe and install the Throttle Pump and the tune Evo 8 Revolver.